Crimping tools


	AUTO - CRIMP CAT. NO. 2002
Self -adjusting combination crimping tool for the cord end terminals (ferrules), with ratchet controlled crimp. Adjusts automatically to crimping pressure from 0.5 to 2.5mm², from 4.0 to 6.0mm² and 10mm². Vertical motion crimping pressure with power shift control. Print Brochure		Technical Specifications Capacity: Crimping: 0.5 to 10mm² End Terminals (ferrules). Dimensions: 180 x 44 x 16mm


	SURE - CRIMP CAT. NO. 05910/Connector Type
Dedicated modular plug crimping tool for all sizes of RJ, MMJ or DEC connectors. Front loading parallel action crimping pliers which strips to proper length both round and flat cables in preparation for crimping. All metal construction, hardened and tempered throughout, equipped with wire cutter. Print Brochure		Technical Specifications Capacity: Crimping: BT630A and 631A - 4 and 6 way or Molex FC-68 4 and 6 way or RJ-11 - 2,4,6 or RJ-45 - 8 way Stripping & Cutting: All Round and Flat Data Com Cables Dimensions: 205 x 50 x 18mm.


	COMBI - TEL CAT. NO. 05903...10
Combi-Tel is the ultimate dedicated modular telephone plug termination pliers that gives you everything you need to make the perfect connection. This simple lever action hand tool has been developed not only to crimp both line and handset plugs and sockets, but also to prepare the cordage prior to insertion into connector. The tool is supplied pre-set for a particular plug and cable. Print Brochure		Technical Specifications Capacity: Crimping: CT1 #05903 BT 4 way - 430A and 431A CT2 #05904 BT 4 way - 630A and 631A CT3 #05905 Molex 4 way -FCC-68-4/4 CT4 #05906 Molex 4 way -FCC-68-6/4 CT5 #05907 Molex 6 way -FCC-68-6/6 CT6 #05908 WE 2/4/6 way - RJ11 6/2, 6/4 & 6/6 CT7 #05909 WE 4 way - 4/4 CT8 #059010 8 Way modular plug connector Stripping & Cutting: All Flat Data Com Cables Dimensions: 170 x 80 x 16mm


	CRIMP - ALL CAT. NO. 05920
Modular connector universal crimping tool. This steel frame, vertical crimping motion tool, crimps all sizes of RJ, MMJ and DEC modular connectors and cordages. Fast exchange of punch and die sets ensures the ability to change the settings instantly to suit all crimping requirements. The tool is equipped with a cutter and strips to proper length both round and flat cables in preparation for crimping. Ratchet controlled crimping with dual strain relief crimps for maximum pull out strength. The tool comes packed in a smart case with the number of punch and die sets as required. Print Brochure		Technical Specifications Capacity: Crimping: BT630A and 631A - 4 and 6 way, Molex FC-68 4 and 6 way, RJ11 - 2,4,6 RJ-45 - 8 way Stripping & Cutting: All Round and Flat Data Com Cables Dimensions: 180 x 44 x 16mm


	COMPRESS - ALL CAT. NO. 2004
Designed to assemble a whole range of 59 & 6 series connectors. Supplied with a number of colour coded gauge blocks which are required to set up tool compression for different connectors. The connector nest is open on one side only which facilitate connector alignment before pressing. Simply squeeze the handles to close totally to stop to ensure sleeve is fully compressed. Print Brochure		Technical Specifications Capacity: Compressing: 59 and 6 series connectors Dimensions: 180 x 44 x 16mm

ALLOY CRIMP TOOLS

CAT NO. ZBT-3168A Modular Plug Crimping Tool. Compact & durable tool for convenient field use in terminating modular plugs to flat-oval, jacketed-round and shielded cables. 2p-4p-6p nest for terminating RJ-11 plugs. 8 position nest for terminating RJ-45 plugs. Print Brochure	CAT. NO. ZBT-3178A Multi-Function Coaxial Cable Stripper/Cutter Strips cable RG58/59 and wire-rope cutter. Cuts standard solid wire

ALLOY CRIMP TOOLS

CAT. NO. ZBT-3178A

Multi-Function Coaxial Cable Stripper/Cutter
Strips cable RG58/59 and wire-rope cutter.
Cuts standard solid wire

Economy Range For The Electronic & Electrical Services
	ZBT-05910 Slim nose Frame 200mm(8”)	ZBT-05960 Parallel nose Frame 225mm(9”)	ZBT-05920 Cranked nose Frame 225mm(9”)	TE-05950 Safe-Crimp Frame 225mm(9”)
This range is identical in design to ‘Alloy Tools’ but made of hardened carbon steel throughout all their components. Ratchet controlled and tested to 50,000 ops. Will accept all types of dies presently available on the international market. A large choice of dies sets clearly marked for fibre optic, modular plugs, coax and wire connectors available from stock. Special profiles to customers’ design, available on request. Refer to Die Sets Print Brochure

Economy Range For The Electronic & Electrical Services

ZBT-05910
Slim nose
Frame 200mm(8”)

ZBT-05960
Parallel nose
Frame 225mm(9”)

ZBT-05920
Cranked nose
Frame 225mm(9”)

TE-05950
Safe-Crimp
Frame 225mm(9”)

This range is identical in design to ‘Alloy Tools’ but made of hardened carbon steel throughout all their components.
Ratchet controlled and tested to 50,000 ops. Will accept all types of dies presently available on the international market. A large choice of dies sets clearly marked for fibre optic, modular plugs, coax and wire connectors available from stock.
Special profiles to customers’ design, available on request.

Refer to Die Sets

Print Brochure

Top

Alloy Crimping Tools For The Electronic Industry

	ZBT-05910A Slim nose Frame 200mm(8”) Wt. 250 g.	ZBT-05960A Parallel nose Frame 225mm(9”) Wt. 325 g.	ZBT-05920A Cranked nose Frame 225mm(9”) Wt. 325 g.
NCT’s innovative, lightweight and ergonomic crimp frame design with full-cycle ratchet allows ease of use without user fatigue. Precision made from light weight alloy, it’s as strong as most steels yet weighs 50% less than conventional frames. Use this unique 9” frame with die sets below for aircraft fitting, telecom and CATV wire/cable applications. ESD-safe frame offers high-corrosion resistance. It’s non-magnetic to protect electrical and electronic equipment from magnetic interference. Frame material doesn’t produce sparks when struck. Use it to work more efficiently, comfortably and safely. Lifetime defect-free warranty. Special profiles to customers’ design, available on request. Refer to Die Sets Print Brochure

Alloy Crimping Tools For The Electronic Industry

ZBT-05910A
Slim nose
Frame 200mm(8”)
Wt. 250 g.

ZBT-05960A
Parallel nose
Frame 225mm(9”)
Wt. 325 g.

ZBT-05920A
Cranked nose
Frame 225mm(9”)
Wt. 325 g.

NCT’s innovative, lightweight and ergonomic crimp frame design with full-cycle ratchet allows ease of use without user fatigue. Precision made from light weight alloy, it’s as strong as most steels yet weighs 50% less than conventional frames. Use this unique 9” frame with die sets below for aircraft fitting, telecom and CATV wire/cable applications. ESD-safe frame offers high-corrosion resistance. It’s non-magnetic to protect electrical and electronic equipment from magnetic interference. Frame material doesn’t produce sparks when struck. Use it to work more efficiently, comfortably and safely. Lifetime defect-free warranty.
Special profiles to customers’ design, available on request.

Refer to Die Sets

Print Brochure

Top


	PARALLEL CLOSURE CRIMPING TOOL CAT. NO. TP-05950
Innovative parallel closure crimping tool. Featuring the parallel closure of the crimping jaws, this tool guaranties precision crimps in conformity of all international standards. Ratchet controlled crimping, the tool is also equipped with a cutter. Print Brochure		Technical Specifications Capacity: Stripping: 0.5mm² to 6.0mm² Cutting: 10mm² Max Stranded Copper Conductor. Crimping: Up to 6mm² Insulated Terminals Up to 10mm² Ferrules (cord-end terminals) Dimensions: 225mm(9”) Long Frame Material: Toughened Carbon Steel Weight: 550gms Back

Top


NEW CONCEPT CRIMPING TOOLS
Steel Construction CAT. NO. TS-05950	Alloy Construction CAT NO. TA-05950	Stainless Steel Construction CAT NO. TM-05950
Conventional designs are made from high grade carbon steel, hardened to ensure long term quality. Lightweight alloys to aircraft and space specifications are used in their production, reinforced by stainless steel hardened liners wherever necessary to strengthen their construction and ensure their long life with lasting precision. High grade stainless is used throughout the construction of tools designated for use in very corrosive condition. Their crimping dies are precision machined from stainless steel or H/D alloys. Our designs of frames accommodate standard crimping dies presently available internationally.

Top


Refer to Die Sets	SAFE-CRIMP CAT. NO. TS-05950
Conventional designs are made from high grade carbon steel, hardened to ensure long term quality. Print Brochure		Technical Specifications Capacity: Cutting: 10mm² Max Stranded Copper Conductor. Crimping: Up to 6mm² Insulated Terminals Up to 10mm² Ferrules (cord-end terminals) Dimensions: 225mm(9”) Long Frame Material: Toughened Carbon Steel Weight: 550gms Back

Top


Refer to Die Sets	SAFE-CRIMP CAT. NO. TA-05950
Lightweight alloys to aircraft and space specifications are used in their production, reinforced by stainless steel hardened liners wherever necessary to strengthen their construction and ensure their long life with lasting precision. Corrosion resistant - Spark proof - Non magnetic - Anti-static. Print Brochure		Technical Specifications Capacity: Cutting: 10mm² Max Stranded Copper Conductor. Crimping: Up to 6mm² Insulated Terminals Up to 10mm² Ferrules (cord-end terminals) Dimensions: 225mm(9”) Long Frame Material: Lightweight Alloy Weight: 300gms Back

Top


Refer to Die Sets	SAFE-CRIMP 'MARINE' CAT. NO. TM-05950
High grade stainless is used throughout the construction of tools designated for use in very corrosive condition. Their crimping dies are precision machined from stainless steel or H/D alloys. Material: – Stainless Steel - Rust-Free Suitable in marine environment - Non magnetic Print Brochure		Technical Specifications Capacity: Cutting: 10mm² Max Stranded Copper Conductor. Crimping: Up to 6mm² Insulated Terminals Up to 10mm² Ferrules (cord-end terminals) Dimensions: 225mm(9”) Long Frame Material: Stainless Steel Weight: 410gms Back

Top


DIE SETS ELECTRICAL
Print Brochure Back
DATA CONNECTORS DIE SETS
Print Brochure Back
FIBER OPTIC DIE SETS
Print Brochure Back
COAXIAL DIE SETS

Print Brochure Back

Top


SAFE CRIMP STRIPPING/CRIMPING DIES FOR WIRE TERMINATION
Print Brochure
PRECISION MACHINED DIE SETS TO DIN STANDARDS MADE FROM AL-T6™ OR NGS COMPOSITE MATERIALS WHICH ARE: NON-MAGNETIC – RUST RESISTANT – NON SPARKING & OF EQUAL COMPRESSION RESISTANCE TO CONVENTIONAL EQUIVALENTS. THESE DIES ARE HIGHLY RECOMMENDED FOR USE WHERE EXTREME STANDARDS OF CRIMPING JOINTS MUST BE MAINTAINED.
Print Brochure
Back

Top

Required to print Brochures.
Download