 |
 |
 |
 |
 |
|
|
|
|
|
|
|
 |
 |
|
|
| ||
|
The tool is designed to strip the outer insulation off a wide range of flat shaped fiber optic cables. With this new approach of side stripping, removal of these hard insulations is made relatively easy. The tool is equipped with an adjustable length stop.
|
Technical Specifications
Capacity:
Length:
38mm Maximum.
|
||
|
|
OPTI STRIP |
|
|
|---|---|---|---|
|
Designed to remove the secondary coatings from optical leads and small cables up to 3000 microns. Is equally effective whether used on ‘loose’ or ‘tight fit’ fibres. Supplied with guide bushes to ensure precise location of fibre throughout the stripping operation. Simple operating procedure with adjustable blades.
|
Technical Specifications
Capacity:
|
||
|
|
SILICA STRIP |
|
|
|
Easy to use stripping tool for fast removal of primary silicone coatings from optical fibres. The stripping blades are made of acetal and their permanently set angle brings the coating off smoothly when the tool is gentle pulled along the fibre. The tool design ensures no damage to the light guide even when excessive pressure is applied during the stripping operation. |
Technical Specifications
Capacity: |
||
|
SPLIT STRIP
|
| ||
|---|---|---|---|
|
This lever action hand tools is designed to remove any length of Kelvar reinforced protective sleeve from fibre optic bundles of between 2.5 and 6.5mm dia. Correct positioning of the sheath is ensured at all times by sleeve guides, selected according to the sheath dia. The tools cuts the Kevlar sleeve first circumferentially and then pulled longitudinal the sleeve taking two cut simultaneously for easy removal.
|
Technical Specifications
Capacity: Kevlar is registered trademark of Dupont |
||
|
CAT.N0.06804 | |||
|---|---|---|---|
|
Strips P.T.F.E. and similar insulated wires and is ideal for workshop and laboratory use. The simple operating procedure involves inserting the wire, twisting the tools and pulling off the insulation. The tool comes complete in it’s own storage case including a set of guide bushes and a set of spare blades.
|
Technical Specifications
Capacity: Weight : 32gms. Dimensions: 10 x 21 x 132mm. Kevlar is registered trademark of Dupont |
||
|
OPTIC FIBRE PREPARATION KIT | |||
|---|---|---|---|
|
This Fibre Optic Preparation Set contains a complete range of special purpose tools designed specially for the preparation of single and multi mode optical fibres and cables ranging from micro coatings to reinforced loose tube constructions. The kit is ideal for both field and laboratory use and contains: · Split Strip - For the removal of Kevlar protective sleeve. · Opti Strip - For stripping the secondary coatings from optic fibres. · Silcon Strip - For the removal of primary coatings from fibre optic leads. · Precision Cutters and screw drivers included.
|
Technical Specifications Capacity:Stripping: Kevlar protective sleeve 2.5 to 6.5mm dia. Fibre Optic leads from 0 - 3000 micron. P.T.F.E. coated wires 0.5 - 3.0 mm dia.
Comes in a handy carry case containing: Case Dimensions: 295 x 200 x 50mm.
Kevlar is registered trademark of Dupont |
||
