|
|
|
|---|
|
| ![]()
CABLE DUCT SLITTER
|
![]() | |
|---|---|---|---|
|
This special purpose hand tool is designed to facilitate separation of high tensile, load bearing wire from the PVC cable duct in a continuous motion and with as little effort as possible. Self adjusting up to 5/8” diameter of high tensile wire. Guarantees effortless production of infinite lengths of cut in mid-span or end of duct, regardless of duct diameter. |
Technical Specifications
Capacity:
75mm(3") Duct Diameter |
||
![]() |
CABLE DUCT WINDOW CUTTER
|
| |
|
This special purpose hand tool is for cutting a window in a tubular PVC cable duct when in position and loaded with conductors, for the purpose of obtaining an access to wires when arranging a “branch off ” from existing circuits. The tool is totally safe in use preventing the possibility of damage to the wires present in the duct while cutting an access window of 25mm wide and from 25mm up to any required length. |
Technical Specifications
Capacity: 50mm Cable duct diameter. |
||
WIRE CUTTERS
|
|
|---|---|
Cutting of copper and
aluminium cables. Made from high
grade hardened and tempered carbon steel.
|
Technical Specifications Capacity: |
![]() |
MINIATURE PLIERS
|
![]() |
||
![]() CAT NO. 100/3AN-37 |
![]()
|
![]() CAT NO. 100/4N-37 |
![]()
|
![]() CAT NO. 100/4P-50 |
|
A unique and versatile range of assembly pliers with
a wide range of shapes to choose from. Controlled spring assisted opening. Parallel action throughout the entire range. High carbon steel, hardened and tempered jaws. Customized shapes upon request. |
Technical Specifications Capacity: Jaw Opening
16mm Maximum
|
|||
|
PUNCH DOWN TOOLS
|
|
Impact Type Punch
Down Tool.- CAT. NO. ZBT-3301 |
![]() |
|---|---|
|
|
|
Trap
Tool |
|
|
|
Technical Specifications Capacity:
7/16” hex
F-fittings |
![]() Trap Tool Cat. No. 718 |
|
|
Combines a trap wrench with a security wrench. |
Technical Specifications Capacity:
7/16” hex
F-fittings
|
Wrench |
|
|
Designed with 3/8” and 7/16” hardened steel hex ends. |
Technical Specifications Capacity:
3/8" & 7/16”
Hex Ends |
|
AL-T6 Aluminium & NGS Composite Screwdrivers & Nut Drivers
The Most advanced Screw Drivers & Nut Drivers line available today! |
|
|
View complete list
of:- |
|
Shafts
are machined - not molded of AL-T6 & NGS Composite Materials. ·Engineered and made in the US for toughness and durability. ·AL-T6 is lightweight and in most cases as strong as steel. ·AL-T6 & NGS are Corrosion Resistant. ·AL-T6 does not produce sparks. |
·AL-T6
& NGS Composite are Nonmagnetic which, make them valuable for protecting
electrical and electronic equipment from magnetic interference |
Once you
try our New Line of Copperhead™ AL-T6 & Composite Screwdrivers
and Nut Drivers … |
|
AL-T6TM MAGNETIC SCREWDRIVERS NCT 400A 4” shaft AL-T6™ magnetic interchangeable screwdriver. Composite handle and aluminum alloy shaft provide a lightweight and durable screwdriver. Tool is corrosion resistant. 50% less weight reduces user fatigue. Magnetic bits securely hold screws. Made in U.S.A. |
Type |
Description |
Stock
No. |
NCT
400A |
4”
AL-T6TM Magnetic Quick Change |
90F400A |
NCT
401A |
3/16”
x 4” slotted |
90F401A |
NCT
402A |
¼”
x 4” slotted |
90F402A |
NCT
403A |
9/32”
x 4” slotted |
90F403A |
NCT
404A |
5/16”
x 4” slotted |
90F404A |
NCT
405A |
#1
phillips x 4” slotted |
90F405A |
NCT
406A |
#2
phillips x 4” slotted |
90F406A |
NCT
407A |
#3
x 4” phillips |
90F407A |
NCT
600A |
4”
AL-T6TM Magnetic Quick Change |
90F600A |
NCT
450C |
4”
NGSTM Magnetic Quick Change |
90F450C |
NCT
650C |
6”
NGSTM Magnetic Quick Change |
90F650C |
Note: To obtain 6” shafts, just change the 4 to a 6, i.e. NCT 401 to NCT 601.
AL-T6TM MAGNETIC NUT DRIVERS NGS™
composite nut driver. |
Type |
Description |
Stock
No. |
NCT 423C |
3/16” x 4” NGS |
90F423C |
NCT 424C |
¼” x 4” NGS |
90F424C |
NCT 425C |
5/16” x NGS |
90F425C |
NCT 426C |
11/32” x 4” NGS 90F427C Composite shaft |
90F426C |
NCT 427C |
3/8” x 4” NGS 90F427C Composite
shaft |
90F427C |
NCT 428C |
7/16” x 4” NGS Composite
shaft |
90F428C |
NCT 429C |
½” x 4” NGS Composite
shaft |
90F429C |
NCT 430C |
5/8” x 4” NGS Composite
shaft |
90F430C |
Note: To obtain 6” shafts, just change the 4 to a 6, i.e. NCT 423C to NCT 623C
4” & 6” AL-T6™ Aluminum Nut Drivers with hollow shaft and NGS™ composite handles. Rustproof.

Type |
Description |
Stock
No. |
NCT
415A |
3/16”
x 4” al. hlw. shft |
90F415A |
NCT
416A |
¼”
x 4” al. hlw. shft. |
90F416A |
NCT
417A |
5/16”
x 4” al. hlw. shft. |
90F417A |
NCT
418A |
11/32”
x 4” al. hlw. shft. |
90F418A |
NCT
419A |
3/8”
x 4” al. hlw. shft. |
90F419A |
NCT
420A |
7/16”
x 4” al. hlw. shft. |
90F420A |
NCT
421A |
½”
x 4” al. hlw. shft. |
90F421A |
NCT
422A |
5/8”
x 4” al. hlw. shft. |
90F422A |
Note: To obtain 6” shafts, just change the 4 to a 6, i.e. NCT 415A to NCT 615A
CAN WRENCH Cat. No. NCT 132
Designed with 3/8” and 7/16” hex ends for premise wiring
housing and pedestals
using space age lightweight material (NGS™
composite only).
Ergonomic, one-piece construction. Made in U.S.A.
Type |
Description |
Stock
No. |
NCT
132 |
Can
Wrench |
90F0132 |
NCT
133 |
Can
Wrench |
90F0133 |
|
SETS | NUT DRIVER SET NCT
750A 8pc. nut driver set with NGSTM handle and AL-T6™
4” lightweight aluminum shafts.
NCT 740 7pc. Precision screwdriver set. Set contains 4 slotted 1.5mm. 2.0mm, 2.5mm, 3mm, and 3 Phillips #00, #0, #1 all with ergonomic NGS™ handles and roll-up pouch. Each NGS™ handle and steel blades are precision machined. All precision-machined tips are heat treated for maximum durability. Handle is NGS™ composite material with the easiest spin-free finger control cap. Made in U.S.A.
4 ¾” handle, 3 ½” blade.
BOX SET 31 pc. Bit Box Set
|
| DETAILED SPECIFICATIONS |